27-29 Oct 2020
Melbourne Convention & Exhibition Centre

4 trends in AEC reality capture: Digging into USIBD’s latest report

Jan 22, 2020 Policy & Trends

Industry heavy weights come together to form an industry analysis

The US Institute of Building Documentation’s (USIBD) Fall Forum in Las Vegas, held in conjunction with the Association of General Contractor’s (AGC) BIMForum event, saw the best from the architecture, engineering and construction communities come together to from an industry analysis on the extent to which technologies marketed to this industry are actually being adopted.

This year’s meeting saw Josh DeStefano (DPR Construction) and Kelly Cone (ClearEdge) present the results of USIBD’s Cornerstone Report (CSR) #11. The aim of CSR #11 is to understand the types of reality capture platforms being used for building documentation purposes. The report is compiled by the USIBD’s Technology research committee using a questionnaire supplied to both USIBD members and a wider audience via social media.

Types of reality capture hardware

This survey grouped the types of reality capture systems into five groups: stationary laser scanners, mobile laser scanners, UAVs, 360 cameras, and fixed-site cameras. (Contrary to the understanding of some readers, here “mobile laser scanners” refers to a handheld or backpack-mounted laser scanning system rather than a vehicle-based mobile mapper.)

The reality capture platforms included in this survey were obviously set to match the ones used on the construction site to perform tasks like progress documentation (including the movement of materials) across site, in addition to measured surveys, or recording internal/external as-built conditions.

1. Stationary laser scanners dominate

Among respondents who said that they used a reality capture platform, stationary laser scanners (i.e. terrestrial laser scanners) are the dominant technology. This should be no surprise, considering that in the 2014 incarnation of this survey, terrestrial scanners were virtually the only type of reality capture system being used.

In 2018, we see the use of stationary laser scanners at maturity. They are used by contractors and service providers who have clear preferences to rent rather than own. This technology has clear buy-in.

Looking at the scanner brands favored by contractors and survey service providers, some conclusions can be made. Contractors appear to favor Trimble and Leica. It is no surprise that contractors would use a lower-grade, easy-to use system such as Leica’s BLK360.

Surveyors favor FARO and Leica. Perhaps surveyors are using FARO scanners and higher-end Leica (e.g. P-series) models due to increased levels of data resolution and relative accuracy, as well as the fact that, as surveyors, they already own survey equipment such as total stations.

2. The 360 camera is in widespread use

For many stakeholders point clouds are still seen as too abstract or “technical” a deliverable. On the other hand, anyone can understand a photograph. That’s why photodocumentation, the photographing of an entire site at defined phases during the build, is now seen as a necessary process across large projects. The process helps projects to comply with local bylaws (e.g. those related to fire safety) and other contractual obligations.

Over the last five years vendors have begun offering more pro-quality 360° cameras suited for this workflow, and more consumer-grade 360° cameras have hit the market. Users have increasingly recognized the efficiencies that these tools bring. A 360° camera captures an image that can replace eight frames from a traditional camera, which reduces the time needed for administrative activity on the busy construction site. Any such tool will be welcomed by a contractor.

Among those who owned 360° cameras, most owned either 1-2, or more than 20.  As someone who has worked with 360° cameras since their introduction to the market, I am certainly pleased to see the widespread understanding of their value.

3. The use case for handheld laser scanners is still in its infancy

The use case for 360° camera appears to be understood. However, the market seems unsure about where to apply another system born from the commoditization of technology and the diversification of reality capture form factors: the handheld scanner.

From a productivity perspective, the ability to collect data while walking through a facility brings tangible benefits in terms of speed. However, users appear to be uncertain about using a point cloud that does not necessarily have the accuracy and precision of that from a traditional tripod-mounted laser scanner.

Since users are more likely to rent handheld scanners than buy, it seems they are approaching handheld scanners with some trepidation.

 

4. Reality capture is being embraced by end-users

Finally, a distinct shift towards the end-user in the building documentation market. In CSR #11 perhaps the most important realization is that over half the respondents to the survey about reality capture hardware are now the contractors themselves.

Use cases such as photodocumentation are now defined to the extent that they are often seen as necessary on a construction project—just like any other reporting or time-management activity.

The trends seen in this Cornerstone Report provide valuable insight into the near-to-medium term developments that can be seen in the 3D-imaging market.

Written by Jeremiah Karpowicz

Original article appeared on Spar3D

  • Register for DesignBUILD 2020 online now to save $25 on the day!
  • Register
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×